118 Photos
Lebanon, TN
10,200 小时
D7J8-0200
Loading...
即将开具检查报告。请您稍后再来查阅。
身份证号码
#13933282
在露天场地
是
制造商
型号
序列号或 VIN
D7J8-0200
功能
Air Conditioner, Anti Two-Block, Link-Belt Load Moment Indicator, Cat C6.6 ACERT 6 Cylinder 6.6 L Diesel Engine, 41 ft Minimum 127 ft Maximum Boom Length, Auxiliary Hoist, Rooster Sheave, 39.6 ft to 67 ft Bifold Jib, 1345 lb 75 ton Capacity 5 Sheave Hook Block, 757 lb 19 ton Capacity Overhaul Ball
Featured Photo
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
D7J8-0200, No serial number or manufacturer’s identifying number found. This unit may be difficult to export.
Hour Meter / Odometer
10200 hrs, Meter reading could not be obtained, This hour meter does not appear accurate, there’s a sharpie note indicating it was replaced 06/16/25 but no replacement hours is listed anywhere on this asset-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Indication of Additional Hours
There are repair records with the following meter reading greater than that on the meter: 20485, The safety certification paper lists hours being at 20632 as of 03/07/25
Safety Certification Label
There is a safety certification label with a date of 03/07/25
Safety Certification Report
Safety Certification Report Available
Load Chart
Yes
Limited Function Check
The main components are in place and operational as noted.
Limited Function Check
The engine started and ran.
Limited Function Check
The drivetrain was operational.
Limited Function Check
The hydraulic system was operational.
Deficiencies
Deficient Components/Systems Include but are not limited to: Control Station Section, Hydraulics Section, anti two-block is sitting in the control station (not attached), left front outrigger cylinder has a slow dripping leak
详细的设备信息范围有限,且除本文明确列出的方面或组件外,利氏兄弟拍卖公司并未检查设备中的任何其他方面或组件。除非另有明确声明,我们不会对设备或其组件作出任何形式的明示或暗示的陈述或保证。这包括但不限于关于功能、符合或遵循任何适用权力机构或监管机构的安全标准或要求、适用于任何特定用途,或者适销性的任何陈述或保证。我们强烈建议您在竞拍之前自行对设备进行详细检查。
设备并未在负载条件下进行测试,也未在所有可用挡位下运行。我们不对设备运行符合制造商的规范作出任何声明或保证。除本文明确指出的功能外,我们未对任何其他功能方面进行任何检查。仅提供了各个底盘部件的部分照片,这些照片可能无法全面反映整个底盘的整体状况。
测量值仅作为估计值提供。实际装载尺寸可能因卡车或拖车的高度以及所装载机器的配置/位置而有所差异。买方在离开我们的拍卖场前,有责任对所有货物进行测量,确保货物能够安全运输。所有测量值均应由买家验证。请勿依赖这些测量值来安排货物的运输。