Demolition Pulverizer For Sale

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 24-40 tons.Max Opening: 30 in.Max Crushing Force: 150 tons.Weight: 5750 lb. Equipped with Swiss imported motor with rotation and imported HALLITE oil seal. Blades are both replaceable and reversible.With Swedish Hardox 500 steel • lightweight and wear-resistant;The pin is made of 42CrMo alloy steel with high strength and toughness; Full hydraulic cylinder protection thanks to the piston rod guard.360" endless hydraulic rotation allows optimal positioning and precisehanding.Cutting blades are both replaceable and reversible.

to fit CAT320 •for 20-30 ton excavator • two hoses

To Suit 24-35 t Excavator • Open/Close Operating Pressure: 300-340 bar • Open/Close Oil Flow Rate: 150-200 l/min • Weight 2639kg

to fit 16 - 40 ton excavators

To Suit 18-26 t Excavator • Open/Close Operating Pressure: 280-320 bar • Open/Close Oil Flow Rate: 120-180 l/min • Weight 1934kg

to fit 16 - 40 ton excavators

to fit 12 - 35 ton excavators

to fit 20 - 55 ton excavators

to fit 20 - 55 ton excavators

To Suit 16-22 t Excavator • Open/Close Operating Pressure: 280-320 bar • Open/Close Oil Flow Rate: 70-120 l/min • Weight 1325kg

to fit 10 - 24 ton excavators

to fit 14 - 30 ton excavators

To Suit 12-18 t Excavator • Open/Close Operating Pressure: 270-300 bar • Open/Close Oil Flow Rate: 70-120 l/min • Weight 1135kg

to fit 16 - 40 ton excavators

to fit 9 - 25 ton excavators

to fit 10 - 24 ton excavators

80 mm Diameter Pins • 445 mm Center of Pin Boss to Center of Pin Boss • 305 mm Inside to Inside Pin Boss Spacing

to fit 12 - 28 ton excavators

to fit 10 - 24 ton excavators

to fit 10 - 23 ton excavators

80 mm Diameter Pins • 445 mm Center of Pin Boss to Center of Pin Boss • 305 mm Inside to Inside Pin Boss Spacing

65 mm Diameter Pins • 460 mm Center of Pin Boss to Center of Pin Boss • 280 mm Inside to Inside Pin Boss Spacing

Fits Komatsu • Hitachi • CAT • Volvo • Daewoo • John Deere 24-40 Ton Excavators

To Suit 8-12 t Excavator • Open/Close Operating Pressure: 250-280 bar • Open/Close Oil Flow Rate: 50-70 l/min • Weight 596kg

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 20-25 tons. Max Opening: 31 in. Max Crushing Force: 80 tons. Weight: 3347 lb. Equipped with Swiss imported motor with rotation and imported HALLITE oil seal. Blades are both replaceable and reversible. With Swedish Hardox 500 steel • lightweight and wear-resistant; The pin is made of 42CrMo alloy steel with high strength and toughness;

to fit CAT315 •for 10-18 ton excavator • two hoses

to fit 5 - 13 ton excavators

to fit 4 - 12 ton excavators

to fit 4 - 12 ton excavators

Fits Komatsu • Hitachi • CAT • Volvo • Daewoo • John Deere 20-25 Ton Excavators

to fit CAT305 •for 4-7 ton excavator • two hoses

JAW OPENING - 41 INCHES - JAW WIDTH - 22 INCHES - OVERALL LENGTH - 105 INCHES - PULVERIZER WEIGHT - 6 •173LBS - HARDOX 500 STEEL WITH REPLACEABLE TEETH AND BLADES

to fit 24-35 ton excavator • Rotation 360° • Open/close operating pressure: 300-340 bar • Open/close oil flow rate: 150-200 l/min • weight 2639kg

to fit 24-35 ton excavator • Rotation 360° • Open/close operating pressure: 300-340 bar • Open/close oil flow rate: 150-200 l/min • weight 2639kg

to fit 18-26 ton excavator • Rotation 360° • Open/close operating pressure: 280-320 bar • Open/close oil flow rate: 120-180 l/min • weight 1934kg

to fit 18-26 ton excavator • Rotation 360° • Open/close operating pressure: 280-320 bar • Open/close oil flow rate: 120-180 l/min • weight 1934kg

to fit 24-35 ton excavator • Rotation 360° • Open/close operating pressure: 300-340 bar • Open/close oil flow rate: 150-200 l/min • weight 2639kg

to fit 18-26 ton excavator • Rotation 360° • Open/close operating pressure: 280-320 bar • Open/close oil flow rate: 120-180 l/min • weight 1934kg

to fit 16-22 ton excavator • Rotation 360° • Open/close operating pressure: 280-320 bar • Open/close oil flow rate: 70-120 l/min • weight 1325kg

to fit 16-22 ton excavator • Rotation 360° • Open/close operating pressure: 280-320 bar • Open/close oil flow rate: 70-120 l/min • weight 1325kg

to fit 12-18 ton excavator • Rotation 360° • Open/close operating pressure: 270-300 bar • Open/close oil flow rate: 70-120 l/min • weight 1135kg

to fit 12-18 ton excavator • Rotation 360° • Open/close operating pressure: 270-300 bar • Open/close oil flow rate: 70-120 l/min • weight 1135kg

to fit 8-12 ton excavator • Rotation 360° • Open/close operating pressure: 250-280 bar • Open/close oil flow rate: 50-70 l/min • weight 596kg